Three effect energy-saving evaporator

Product Description
This equipment is suitable for the concentration of traditional Chinese medicine, Western medicine, glucose, starch sugar, oral liquid, chemical, food, monosodium glutamate, dairy and other materials, as well as the recovery of industrial organic solvents (such as alcohol). It is suitable for the low-temperature vacuum concentration of small batches and a wide variety of heat sensitive materials. Adopting external heating natural circulation type and vacuum negative pressure evaporation method, it has fast evaporation speed, significant concentration ratio, and can reach 1.4 (general traditional Chinese medicine extract), without the need for an open pot to collect the extract.
This concentrator adopts three effects of simultaneous evaporation, and the secondary steam is repeatedly used, reducing energy consumption by about 70% compared to a single effect. The full investment of this concentrator can be recovered from the energy-saving cost in less than a year.
Multifunctional operation features:
(1) The Alcohol by volume concentration can be recovered at about 80 degrees;
(2) Three effects can concentrate three different materials.
(3) One effect, two effects, three effects, three effects, two effects, and one effect can be repeatedly combined to collect cream.
(4) Intermittent and continuous feed concentration is possible.
(5) It can be made into paste in one go, starting from the first effect feeding, passing through the second and third effects, and has already been made into paste in one go.
This concentrator has a special structure, and the concentrated material has a strong taste and uniform green quality. The material can be concentrated without foam in the seal, so that it is not easy to run away and reduce pollution. The material is concentrated on the same day, so it is not easy to coke, and it is easy to clean. Open the upper and lower covers of the heater to clean, and save labor. One person can operate.
The contact area between this concentrator and the material is made of stainless steel SUS304. The heater and evaporator are both equipped with insulation layers. The insulation is made of polyurethane foam, and the outer surface is frosted and matte treated, meeting GMP standards.
technical parameter

 Note: In addition to the specifications of the table series, it can also be designed separately according to customer requirements.